In-Tank Disinfection for Storage & Secondary Supply
0.23–4.6 m³/h · Water + Headspace · Single-End 4-Pin
KCJ submersible sterilizers work inside the storage vessel itself: the sealed lamp-and-sleeve assembly acts on both the stored water and the residual air in the tank headspace, maintaining tank cleanliness and preventing secondary contamination at the point of draw-off.
KCJ is the first choice for high-level tank outlets, storage-tank outlets and booster-pump inlets in compartmentalized or timed supply — used across electronics, pharmaceutical, food and cosmetics water systems. Selection follows the tank geometry, treatment flow and water quality; basic configuration is the UV lamp, high-transmission quartz sleeve, electronic ballast and connection fittings.
| Model | Power | Capacity | Lamp | Sight port | Dimensions (mm) | Sleeve port |
|---|---|---|---|---|---|---|
| KCJ-10W | 10 W | 0.23 m³/h | 10 W × 1 | No | 300 × 40 | Φ36 |
| KCJ-14W | 14 W | 0.5 m³/h | 14 W × 1 | No | 350 × 40 | Φ36 |
| KCJ-40W | 40 W | 2.3 m³/h | 40 W × 1 | No | 950 × 40 | Φ36 |
| KCJ-75W | 75 W | 4.6 m³/h | 75 W × 1 | No | 1650 × 40 | Φ36 |
Single-end 4-pin lamps. Values are reference ranges for the stated conditions, not a project guarantee.
In-line units disinfect flowing water in the pipe; in-tank KCJ units disinfect the stored water and the tank headspace where secondary contamination occurs.
By tank geometry, draw-off flow and water quality — the assembly length and lamp power are matched to the vessel.
Send your water analysis, target capacity and application. KONCHE will help select and configure the suitable system.
Get Expert Support →